Usually, there is a limit to the number of plastics that can be bonded, and not all resins can be bonded.
The resins that can be bonded by OM are as follows
Acrylic
Vinyl chloride
PET
Polycarbonate
ABS
Epoxy glass
Each material requires a different adhesive, and since air bubbles will form on the bonded surface, it is necessary to clarify which points, such as cleanliness and strength, are necessary.
In some cases, a triangular bar called a reinforcing material may be inserted at the gluing point, since the strength will vary depending on the thickness of the board and which surface is to be glued on the drawing.